How to adjust bicycle spokes"
add time:2021-03-17 13:08:02 Click volume:
Adjust the tightness of the spokes to adjust whether the bicycle wheels rotate in the same plane.
You need a spoke wrench first.
It is common to combine three spokes in one mesh, that is, each spoke intersects with the other three spokes once.
There are ribbons between the spokes and the spoke cap. The spoke tightness can be adjusted by rotating the spoke cap with a spoke wrench. However, before adjusting the spokes, let the air out of the tire. Otherwise rotating the spoke cap is easy to Pierce the inner tube.
Adjust the tightness of the spokes in order to keep the circumference of the rim. You can observe the Zhou Zheng of the car circle in the following three ways:
1. Remove the wheel and install it on the ring frame.
2. Do not remove the wheel, hold the fork in one hand, and turn up the thumb near the inner rim.
3. Observe the clearance between the brake and the rim.
Either way, the principle is:
Rotate the wheel, if the gap between the rim and the reference is large, then tighten the spokes here, otherwise loosen the spokes;
If the rim deviates to the left, tighten the right spokes and loosen the left spokes. Conversely tight on the left, loose on the right.
The gap between the whole rim and the reference object is uniform, and the tightness of each spoke is uniform, then the school bus circle is completed.
Similar information
172021-03
How to use cold patching glue
2021-03-17
Adjust the tightness of the spokes to adjust whether the bicycle wheels rotate in the same plane.
You need a spoke wrench first...
MORE
